Operating & Mounting instructions – 8 074 143.03/03 – Page 47
Parameters
Function: OOL C021, CC022 oor CC026 == 003 OL “Overload mmessage”
This message is issued as soon as the motor current exceeds the value set for parameter C041, both
during motor and generator operation.
C042
C043
0.5 Hz
1.5 Hz
60 ms
0.5 Hz
0.5 Hz
0.5 Hz
C042
C043
60 ms
f
f
0.5 Hz
1.5 Hz
1.5 Hz
1.5 Hz
Funktion FA1: C021, C022 oder/or C026 = 1
Funktion FA3: C021, C022 oder/or C026 = 6
Funktion FA2: C021, C022 oder/or C026 = 2
“Sollwert erreicht” / “Reference value arrival”
“Frequenz erreicht” / “Frequency arrival”
“Frequenz überschritten” / “Frequency exceeded”
1.5 Hz
Output
signal
Ausgangs-
Ausgangs-
signal
signal
60 ms
60 ms 60 ms
f
b022
Überlastsignal /
overload signal
min. 1 sec
Motorstrom
Motor current
I [A]
t
t
Function: OOD C021, CC022 oor CC026 == 004 OD “PID ddeviation ttoo hhigh”
This message is issued as soon as the difference between reference value and actual value exceeds
the value set for parameter C044 (bipolar).
To Next Page
Loading...
General