Operating & Mounting instructions – 8 074 143.03/03 – Appendix A1
>pDRIVE< CX profi Frequency inverters
Start-up Log
Type: CX profi 11 CX profi 15 CX profi 18
CX profi 22 CX profi 30 CX profi 37
Serial number: Code:
Customer / Company: Supplier / Company:
Date of delivery: Commissioning date:
Parameter adjustments
F-Parameters
No. Parameter name Factory default Setting Page
F001 Output frequency - 18
F002 1st Acceleration ramp 30 s 18
F202 2nd Acceleration ramp 30 s 53
F003 1st Deceleration ramp 30 s 18
F203 2nd Deceleration ramp 30 s 54
F004
Running direction of RUN key 00 51
A-Parameters
No. Parameter name Factory default Setting Page
A001 Method of speed command 01 19
A002 Method of run command 01 19
A003 Base frequency 50 Hz 18
A203 2nd Base frequency 50 Hz 53
A004 Maximum frequency 50 Hz 18
A204 2nd Maximum Frequency 50 Hz 53
A005 AT Terminal selection 01 21