17
Mod. Lollo
Gr. 2
Vers. 1 ELETTRONICA
Vers. 2 HX
MPA 0,12 1,2 bar-17,40 psi
Serial N. 58222
VIBIEMME S.r.l.
via Gounod, 25/27
Cinisello Balsamo
20092 (Milano) - Italy
240 V 4000 W 50/60 Hz
Phase trifase Amps 17
4
5
67
8
1
Eng
5.3,
POSITIONING THE MACHINE.
Position the machine in its final location, checking that:
• The support surface is sufficiently strong and stable (taking the machine weight into account) and that it is not sloped.
• There is the necessary space between the machine and the surrounding walls to allow technicians to carry out any maintenance/
repair operations without having to move the machine.
• The top of the machine (cup heating plate) is not more than 150cm from the floor.
• A coffee grounds knockout drawer and a space for the grinder/doser are provided.
• An electrical connection panel, a water drain and a water supply tap in the vicinity of the machine are provided.
6,
MACHINE IDENTIFICATION.
The machine equipment includes an identification plate (1) to be positioned in a
visible area.
The plate (1) bears the following data:
2 Model.
3 Number of units.
4 Machine version 1: electronic or semiautomatic.
Machine version 2: HX.
5 Electrical characteristics.
6 Water supply pressure.
7 Serial number.
8 Manufacturer’s address.
Manuale_LOLLO_Rev1_5lingue-Cinese_07-2016.indd 17 22/08/16 16:08
To Next Page
Loading...
