32
1
2
3
ENG
12.6,
AUTOMATICALLY RINSING THE UNIT.
Each unit can automatically be rinsed operating as follows:
• Remove the filter holder (1) from the unit (2) and empty out the coffee grounds.
• Remove the filter from the filter holder and mount the blind filter (3) provided.
• Pour specific detergent for coffee machines into the blind filter (3) (for the amount, see manufacturer’s instructions).
• Start the machine as described in the relative paragraphs.
• Mount the filter holder (1) with the blind filter on the unit (2).
Semiautomatic version.
• Simultaneously press the buttons “
” and “ ”; the LEDs on the two buttons will come on flashing until the end of the
rinsing program of about 5 cycles.
• You can stop the rinsing cycle by pressing one of the two buttons “
” or “ ”.
Automatic version.
• Press the button “
” and then the button “ ”; the LEDs on the two buttons will come on flashing until the end of the
rinsing program of about 5 cycles.
• You can stop the rinsing cycle by pressing any one of the buttons on the selector knob.
SEMIAUTOMATIC
VERSION
AUTOMATIC
VERSION
Manuale_LOLLO_Rev1_5lingue-Cinese_07-2016.indd 32 22/08/16 16:08
To Next Page
Loading...
