26
1
2
OFF
ON
3
ON
OFF
4
5
6
ENG
12,
OPERATION.
12.1,
PREPARING THE MACHINE.
• Check that the water supply tap upstream of the machine is open.
• Check that the magnetothermal differential switch upstream of the machine is
set to ON.
• Start the machine by setting the switch (1) to ON; the LED (2) will come on.
• The water in the boiler will automatically start heating up indicated by the LED
(3) coming on.
• Wait until the set temperature has been reached indicated by the LED (3) going
off; the pressure indicated on the pressure gauge (4) must be 1 bar (0.1 MPa).
• Set the switch (5) to ON to start operation of the cup heating plate heating
elements; the LED (6) will come on.
• Place the filter holders in the relative units.
• Position the cups possibly facing up.
WARNING: Only cups, mugs and glasses and no other objects may
be placed on the cup heating plate.
Dry the objects before placing them on the cup heating plate.
Manuale_LOLLO_Rev1_5lingue-Cinese_07-2016.indd 26 22/08/16 16:08
To Next Page
Loading...
