VBM LOLLO - Manually Rinsing the Unit

35
3
1
2
4
5
Eng
13.2,
MANUALLY RINSING THE UNIT.
At the end of the work shift, each unit has to be cleaned with the blind filter.
• Remove the filter holder (1) from the unit (2) and empty out the coffee grounds.
• Remove the filter from the filter holder and mount the blind filter (3) provided.
• Pour specific detergent for coffee machines into the blind filter (3) (for the
amount, see manufacturer’s instructions).
• Start the machine as described in the relative paragraphs.
• Mount the filter holder (1) with the blind filter on the unit (2).
• Press the button “
” for the semiautomatic version and the button
“
” for the automatic version.
• Check on the pressure gauge (4) that the pressure reaches about 9 bar (0.9
MPa), then stop dispensing by pressing the button “
” for the semiautomatic
version and any one of the buttons on the selector knob (5) for the automatic
version.
• Repeat dummy dispensing 4-5 times as described above.
• Remove the filter holder (1) from the machine and empty out the product.
• Remount the filter holder (1) with the blind filter on the
machine and repeat dummy dispensing 4-5 times as
described above.
• Remove the filter holder (1) from the machine and remove
the blind filter.
• Remove the filter holder (1) from the unit (2), remove the
blind filter and remount the filter.
• Dispense two coffees to remove any unpleasant flavours.
AUTOMATIC VERSION
SEMIAUTOMATIC VERSION
Manuale_LOLLO_Rev1_5lingue-Cinese_07-2016.indd 35 22/08/16 16:08