23
1
2
3
4
5
6
7
Eng
9,
DESCRIPTION OF THE UNIT CONTROLS.
Each unit has a selector knob for coffee dispensing.
Selector knob for semiautomatic version.
1 Coffee dispensing start button “
”.
• Press the button (1) to start dispensing coffee; the relative LED will come on;
to stop dispensing, press the button (2).
2 Coffee dispensing stop button “
”.
• Press the button (2) to stop dispensing coffee; the LED on the button (1) will
go off.
Selector knob for automatic version.
3 Continuous dispensing/programming button “
”.
•
Press the button (3) to start continuous coffee dispensing; the relative LED will
come on; to stop dispensing, press the button again and the LED will go off.
• Press and hold down the button for 5 seconds; the relative LED will come on
indicating that you have entered dose programming; pressing any one of the
buttons 4, 5, 6 or 7 within 5 seconds, you can program the desired doses
(see the paragraph “Programming the doses”).
4 “One long coffee” dispensing button “
”.
• Press the button (4) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
5 “Two long coffees” dispensing button “
”.
• Press the button (5) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
6 “Two short coffees” dispensing button “
”.
• Press the button (6) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
7 “One short coffee” dispensing button “
”.
• Press the button (7) to start coffee dispensing; the relative LED will come
on and when the programmed amount has been reached, dispensing will
automatically stop and the LED go off.
SEMIAUTOMATIC VERSION
AUTOMATIC VERSION
Manuale_LOLLO_Rev1_5lingue-Cinese_07-2016.indd 23 22/08/16 16:08
To Next Page
Loading...
