VDigi VD-R - Features of VD-R; Viewing TV

Analogue channel scan starts right after DTT channel scan. It starts at
frequency 47MHz and pauses when the first channel is scanned for the
fine-tuning of picture quality. The process then resumes and switches to
auto mode in order to speed up the process.
Manual analogue channel scan starts at frequency 101.
Enter the channels after the channel scan.
Note: Select “list” to display all the scanned channels. Adjustments can be made.
5. Features of VD-R
5.1 Viewing TV
5.1.1 Simple Operations
●
Press the CH+/CH- buttons on the Remote Control to change channel
quickly.
58 / 81