Meaning
Code 17 - Workshop Temporarily Blocked
This message appears when more than 3
attempts to enter the workshop code have
been unsuccessful.
Possible causes
Attempt to manipulate the data of the
tachograph or error of access code or
workshop password.
Solution
This procedure should be performed only by
an authorized service station.
Comments
The blocking for mistaken workshop code
will last for 12 hours.
Any other correct workshop code and
password will not be blocked.
Meaning
Code 18 – Printer Over Heated
Possible causes
Excessive printer overheating due to
continuous printing
Solution
Wait a few minutes for the printer to cool
down.
To Next Page
Loading...
