VDO MS 4100 - RADIO Menu Functions

The “RADIO” menu
In radio mode:
☞
Press the TUNER button.
:
The “RADIO“ menu is displayed.
The following functions are available:
RDS Memo (only on FM)
Searches for all currently available RDS stations and
stores them in alphabetic order.
☞
Activate this function to refresh the RDS Memo.
Refreshing the RDS Memo may require up to 30 seconds.
Autostore
☞
Activate this function to automatically store up to 10 FM/AM stations with strong
signals on the FM AS or AM AS waveband.
Storing Preset
☞
Select the “Store Preset” function to add the currently selected station to the station
list. The storage function can store up to 30 stations.
This function is not available for the autostore wavebands FM AS and AM AS.
Recall Program (only on FM)
☞
Select a station from the alphabetically sorted stations list (RDS Memo).
Recall Preset
☞
Select a previously stored station from the station list.
Manual tuning
☞
Activate this function to set a frequency manually, for example, if the desired station
cannot be set using the automatic search function.
RDS Memo Dyn.
When you are listening to a CD or when the radio is muted, it performs an automatic
search across the complete waveband range every 15 minutes and refreshes the RDS
Memo.
☞
Activate this function in order to always have a current list of receivable RDS
stations.
“TMC” will be switched off automatically when you activate “RDS Memo Dyn.”.
“RDS Memo Dyn.” will be switched off automatically when you switch on TMC.
Scan FREQ/PRST (Preview stations)
☞
Activate this function in order to briefly play stations within the desired waveband.
☞
Press the PUSH – TURN button to cancel the scanning process and to listen to a
station of your choice.
The scan type (storage or waveband scan) can be set in the “Radio Setup” menu.
➽ next page.
33
RADIO
English
RADIO
RDS Memo
Autostore
Store Preset
Recall Program