System settings
To customise the navigation functions to your own
needs, you can change several settings.
☞
In the main menu, select “Settings“.
:
The “System settings“ menu is displayed.
The following information screens are available:
Route selection
☞
Select the preferred criterion:
–
Fastest C: Fastest route preferred
–
Shortest V: Shortest route preferred
–
Main roads N: Motorways are preferred for route planning
–
No main roads M: Avoid motorways for route planning
The symbol for the selected road type is displayed on information screen i3 (System
info).
In addition, you can bypass toll roads when planning your route:
☞
Activate option “No toll roads,“ if you wish to avoid toll roads as much as possible.
:
A check mark appears in front of the option.
If no toll-free roads are available, toll roads will be included for planning the route.
Note: If this option is activated, route planning may take longer than the time needed
with this function deactivated. Therefore this option should only be activated if needed.
Speed
In the “Speed“ menu, you can configure the following settings:
Speed correction
☞
Place the cursor on the value after “Correction“.
☞
Press the PUSH – TURN button.
☞
Set the desired speed correction.
☞
Press the PUSH – TURN button again in order to store this setting.
Speed limit
☞
Position the cursor on the value after “Limit:“.
☞
Press the PUSH – TURN button.
☞
Set the desired speed.
☞
Press the PUSH – TURN button again in order to store this setting.
NAVIGATION
61
English
System settings
Route selection
Speed
Guidance screen
Traffic info
To Next Page
Loading...
