VDO MS 4100 - CD CHANGER Menu Functions

The “CD CHANGER” menu
In CD player mode:
☞
Press the CDC button.
:
The “CD CHANGER“ menu is displayed.
The following functions are available:
Scan
☞
Activate this function to briefly scan all tracks on the currently selected CD.
☞
Press the PUSH – TURN button in order to cancel the scanning process and to listen
to the track of your choice.
Random
☞
Activate this function to listen to the tracks on the currently selected CD in random
order.
Repeat Track
☞
Activate this function to repeat the current track.
☞
Select “Repeat Track“ again to deactivate the function.
Select CD
☞
Select the desired CD from the list.
CD name
☞
Assign a name with up to 13 characters to the CD currently playing. The CD will be
recognised automatically by the CD changer, and the CD changer will display the
CD name.
Up to 50 CD names can be stored automatically in the name memory. Once memory
is full, you will have to first select a name to be deleted before you can enter a new
name.
CD Changer Setup
☞
Set one of the following functions.
–
Compression: If activated, this function will reduce the volume for loud sections and
increase it for quieter sections.
–
Comp Rate: Select the degree of loudness decrease/increase. This function is only
available with compression activated.
–
CD Access: Select if you want to choose the CD in the menu “Select CD“ by
number or by name.
Extra info
Displaying information on the currently selected CD:
–
Number of the selected CD (in magazine),
–
CD name (if available),
–
total number of tracks,
–
total duration and
–
the selected sound type for CD changer mode.
Initialisation
See “INITIALISATION“ ➽ Page 39.
38
CD CHANGER
CD CHANGER
Scan
Random
Repeat Track
Select CD