62
7 Setup with smartphone/tablet (Bluetooth)
FIBERTRAC 31 • Probus PA
43833-EN-170126
For authentication, enter in the next menu window the 4-digit PIN.
The sensor PIN as well as the sensor data are transmitted encrypted
between sensor and adjustment device according to Bluetooth
standard 4.0.
Note:
If an incorrect sensor PIN is entered, the PIN can only be entered
again after a delay time. This time gets longer after each incorrect
entry.
The message "Waiting for authentication" is displayed on the smart-
phone/tablet.
After connection, the sensor adjustment menu is displayed on the
respective adjustment instrument.
If the connection is interrupted, e.g. due to a too large distance be-
tween sensor and operating device, this is displayed on the operating
device. The message disappears when the connection is restored.
7.3 Sensor parameter adjustment
The sensor adjustment menu is divided into two halves:
On the left you'll nd the navigation section with the menus "Setup",
"Display", "Diagnosis" and others.
The selected menu item, recognisable by the colour change, is dis-
played in the right half.
Fig. 21: Example of an app view - Setup sensor adjustment
Connected
Enter parameters
To Next Page
Loading...
Need help?
General
