Instruction Manual PEL-4 Precision LED Sector Light Vega Industries Ltd Aug 2018
PEL-4 Precision LED Sector Light Page 11 of 69 Manual Version V1.06
3.0 MOUNTING AND ALIGNMENT
3.1 Mounting
A typical PEL-4 mounting plate is shown in the following figure. The mounting holes are
designed for M12 or half-inch bolts at 120 degree-spacing on a 286mm Pitch Circle
Diameter (PCD).
PEL-4 5D & 10D Models’ Mounting Bracket – Plan View
PEL-4 3.5D Model’s Mounting Brackets – Plan View
To Next Page
Loading...
