Vega PEL-4 - Introduction to the PEL-4 Precision LED Sector Light

Instruction Manual PEL-4 Precision LED Sector Light Vega Industries Ltd Aug 2018
PEL-4 Precision LED Sector Light Page 3 of 69 Manual Version V1.06
Table of contents
1.0
Introduction to the PEL-4 Precision LED Sector Light. ....................................... 5
1.1 Overview ................................................................................................................... 5
1.2 Quick-start Guide ...................................................................................................... 6
1.3 Automatic Flash Compensation ................................................................................ 7
1.4 PEL-4 Intensity Specification .................................................................................... 7
2.0 Electrical Connection ............................................................................................. 9
2.1 Power Connection ..................................................................................................... 9
2.2 Hardwire Sync Connection ........................................................................................ 9
2.3 DataPort .................................................................................................................... 9
3.0 Mounting and Alignment ...................................................................................... 11
3.1 Mounting ................................................................................................................. 11
3.2 Alignment ................................................................................................................ 12
4.0 Programming ......................................................................................................... 13
4.1 Programming Syntax ............................................................................................... 14
4.2 Visual Feedback when Using the TVIR Programmer .............................................. 14
4.3 If the PEL-4 will not enter Programming Mode ........................................................ 15
4.4 Becoming Familiar with the Programming Syntax and Flash Feedback ................. 15
4.5 Deciding which Settings are required ...................................................................... 17
4.6 Programming or Reading Multiple Settings ............................................................. 17
5.0 Normal, Automatic Operating Mode .................................................................... 18
5.1 Flash Character ....................................................................................................... 18
5.2 Custom Flash Character ......................................................................................... 19
5.3 Day/Night Automatic Operation of the PEL-4 .......................................................... 19
5.4 Night & Day Intensity Settings ................................................................................. 20
5.5 Synchronising Options ............................................................................................ 21
5.6 Battery Thresholds .................................................................................................. 22
6.0 Performing System Checks ................................................................................. 22
7.0 Setting a Security PIN Number ............................................................................ 24
8.0 Flash Character Modes ......................................................................................... 25
8.1 Flash Compensation Modes ................................................................................... 25
8.1.1 IALA E-200-4 2017 Effective Intensity Mode (Default) ................................. 25
8.1.2 Peak Intensity During the Flash Mode .......................................................... 26
9. Remote Control Operation ................................................................................... 27
9.1 Enabling Remote Control Operation ....................................................................... 27