Need help?Do you have a question about the Vega VEGAPULS 6X Series and is the answer not in the manual?
General| Measurement Principle | Radar |
|---|---|
| Accuracy | ±2 mm |
| Frequency | 80 GHz |
| Measuring Range | Up to 120 m |
| Process Temperature | -40 ... +200 °C (depending on the model and process fitting) |
| Output Signal | 4 … 20 mA/HART, Modbus, Profibus PA, Foundation Fieldbus |
| Protection Class | IP66/IP68 (depending on the model) |
| Process Fitting | Thread, flange, hygienic fittings (depending on the model) |
| Materials, Wetted Parts | Stainless steel, PTFE, PEEK (depending on the model and process fitting) |
| Housing Material | Aluminum, Stainless steel |
| Approvals | ATEX, IECEx, SIL, FM, CSA |
| Beam Angle | 3° |
Details different housing types and protection ratings (IP66/IP68).
Specifies available cable entry types (e.g., M20, 1/2 NPT) and connection methods.
Describes options for display and adjustment modules like PLICSCOM, with or without Bluetooth.
Lists available electronics versions, primarily Four-wire Modbus for this document.
Details nonincendive explosion protection markings (CI I/II/III, Div 2) and temperature limits.
Information regarding functional safety certification according to IEC 61508 standards.
Defines specific application areas for the VEGAPULS 6X with electronics version W, including division and group ratings.
Specifications and guidelines for selecting and installing cable glands and threaded openings.
Requirements and considerations for flameproof enclosure type "d" in hazardous areas.
Details about the display and adjustment circuit, including spring contacts.
General regulations and conditions for compliance with thermal data tables.
Thermal data specifications for VEGAPULS 6X in gas environments, by T-class and housing.
Thermal data specifications for VEGAPULS 6X in dusty environments (Zone 20/21).
To Next Page
