Instruction Manual PEL-4 Precision LED Sector Light Vega Industries Ltd Aug 2018
PEL-4 Precision LED Sector Light Page 2 of 69 Manual Version V1.06
Manual quick reference
PEL-4 LED Versions by release date and serial number
WHITE LED
LED Version Release Date Serial Number
480 December 2016 405-00000010
VEGA INDUSTRIES LIMITED
21 Heriot Drive, Porirua 5022, New Zealand
Tel: +64-4-238-0200; Fax: +64-4-237-4392
E-mail: sales@vega.co.nz; website: http://www.vega.co.nz
Product Warranty
Vega warrants that all products supplied are free from labour and material defects, and will repair or replace (at its
option) the whole or any part of the products found to be faulty. Vega is not liable for any charge beyond the point of
delivery, including installation, alignment or testing. To claim under warranty the product must be returned to the
manufacturer.
To view Vega’s warranty terms and conditions please visit http://www.vega.co.nz/terms-and-conditions/.
Legal Notice
Information in this document is subject to change without notice. Vega Industries Ltd. makes no warranty of any kind
with regards to this material, including but not limited to, the implied warranties of merchantability and fitness for purpose.
Vega Industries Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the use of this material. No part of this document may be photocopied, reproduced, or translated to
another language without prior written consent of Vega Industries Ltd. The Vega logo is a registered trademark of Vega
Industries Ltd.
Manual
Description of Change Date manual
Software
PEL-4 Serial
1.00 Initial release. December 2016 2.2.0 405-00000010
1.01 Updated Dataport I/O levels December 2016 2.2.0 405-00000010
1.02 Updated performance figures,
maintenance recommendations
and other minor corrections for
product version 2.0. Monitoring
tags adjusted for interfacing to
AIS & Vegaweb. Error logging
feature added. Improved current
logging data.
March 2017 2.2.3+ 405-00000100
1.03 Updated specification table Nov 2017 2.2.7+ 400-00000140
1.04 Added 3.5D specification table June 2018 2.2.8+ 400-00000160
1.05 Added 3.5D mounting information
and factory default reset codes.
June 2018 2.2.8+ 400-00000160
1.06 Updated monitoring data units for
better VegaAIS compatibility.
Updated flash compensation
mode to support latest IALA E-
200-4 2017 Rec by default.
Incomplete emergency mode
deprecated.
Corrected programming
instructions to describe colour
intensity programming.
August 2018 2.2.9+
To Next Page
Loading...
