Vega PEL-4 - Page 43

Instruction Manual PEL-4 Precision LED Sector Light Vega Industries Ltd Aug 2018
PEL-4 Precision LED Sector Light Page 43 of 69 Manual Version V1.06
Factory Default Reset
Commands (continued)
Programming
Code
Reset
Variant
Reset Effects
1-5-997
<FDF>997/
Oscillating
Boundary
+
On/Off
Remote
Control
+
24V Battery
Thresholds
 Default (Night & Day) Fixed Character (1-0-000)
 Night intensity is set to maximum intensity
 Day intensity is set to maximum intensity
 Master sync & zero sync delay set (1-3-000)
 IALA day/night thresholds (1-4-005)
 Normal, Automatic Best Effort Mode (1-5-002)
 Standard sync behaviour (1-7-999, 1-7-002)
 Low and high battery thresholds reset to 24V
nominal. These should be reviewed by the user
and adjusted for the supply voltage if
necessary.
 Default Effective Intensity Flash Mode & Single
Flash Character Modes (7-2-000)
 Auto-storage and calendar modes are disabled.
 Oscillating boundary detection and alarm
function are enabled.

Remote control On/Off function is enabled.