31
HPS50 PersonalScope
TM
Fig 52
1
Fig 53
2
Screen memory
Pressing the ‘t-V/div’-key when in hold mode
toggles the screen between the frozen waveform
and the stored waveform. ‘Mem’ is displayed if
stored waveform is visible. (1)
RECALL MEMORIES
Notes:
• The store and recall function is only available
in ‘HOLD’-mode
• All setting such as timebase, input sensitivity,
input coupling, probe setting and readouts are
also stored into memory.
It is possible to send a screen picture to your com-
puter using the USB output.
During „Hold“ mode press and keep pressing the
memory key. A screen bit map (BMP) file will be
send to the computer. A capture program can be
downloaded from our site.
During normal measuring, press and hold the
„memory“ key, to capture the screen.
„Transmit“ (2) is displayed briefly during the file
transmit. (Fig.53)
SENDING A SCREEN
CAPTURE TO THE COMPUTER
t-V /div
Memor y
To Next Page
Loading...
Need help?
General
