EasyManua.ls Logo

VER-MAC PCMS Series - Replacement Tires and Rims; Lug Nuts on Wheel

VER-MAC PCMS Series
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tires and Rims Give us your thoughts
Ver-Mac 2018 PCMS Operations, Safety & Maintenance V3.0 15
5.2 Replacement Tires and Rims
CAUTION
Changes in wheel size can seriously affect trailer stability and
safety.
Signalisation Ver-Mac recommends a replacement tire that is the same size, ply and
brand as originally installed on the unit trailer.
Signalisation Ver-Mac recommends a replacement rim that is the same size and brand
as was originally installed on the unit trailer.
5.3 Lug Nuts on Wheel
WARNING
Failure to torque wheel lug nuts to the specifications of the wheel
manufacturer can provoke loss of wheel(s).
Proper torque is essential to prevent wobble and potential loss of wheel(s).Over or
under-torqued lug nuts can cause the wheel to separate from the wheel mounting.
Always check and re-torque wheel lug nuts before towing.
Keep lug nuts un-lubricated at all times.
Wheel Lug Nuts Torque Procedure
1. Use proper tools.
2. Torque lug nuts at 90-120 ft-lb (122-167 N.m.), in the correct order, following the
appropriate star pattern sequence, until tight.
Torque star pattern sequence
5 hole rim
6 hole rim

Table of Contents

Related product manuals