VER-MAC PCMS Series - Work Site Inspection Before Setup

Pre-towing and Work Site Inspections Give us your thoughts
6 PCMS Operations, Safety & Maintenance V3.0 Ver-Mac 2018
2.2 Work Site Inspection (before PCMS Unit Setup)
Site location and conditions affect the effectiveness of portable message signs in a
work zone.
A work site inspection enables you to take every precaution to avoid all hazards in the
work area prior to installation and operation of the unit.
DANGER
Be safe. Stay alert and pay close attention to the surrounding
traffic at all times.
Site Verification Check List
1. Verify site location

as open and level as possible

good road base support

no overhead hazards or obstructions (electric lines,
overpasses, etc)
2. Verify conditions for solar array

maximum exposure to direct sunlight

no shadows from nearby structures

no light towers in close proximity
NOTE
Even the smallest amount of shading reduces solar panel output significantly.