Pre-towing and Work Site Inspections Give us your thoughts
4 PCMS Operations, Safety & Maintenance V3.0 Ver-Mac 2018
2 Pre-towing and Work Site Inspections
These preliminary inspections help to ensure that:
the installation site is suitable
the general condition of the PCMS unit structure is solid
the unit components are all well secured
the braking and lighting systems are operational
2.1 Walk-Around Inspection of PCMS Unit
The walk-around inspection aims to catch any obviously out-of-place conditions that
could potentially affect safety and unit operations.
Always carry out a walk-around inspection of your PCMS unit:
Before moving the unit to the worksite.
Before removing the unit from a work site.
Periodically during long-term storage of the unit.
Make the walk-around inspection part of your pre-towing routine and have the
defects fixed BEFORE going on the road.
A walk-around inspection only covers items that can be checked without getting
under the trailer.
To Next Page
Loading...
