ALARMS
B001167
ALARMS
ALARMS NOTIFICATION
The VMH35 indicator shows internal active alarms
and those coming from NMEA 2000. The
ALARMS
item allows you to set the alarms that
can be generated by the indicator and the relative
alarm thresholds.
In the event of an alarm, the following appears on
the display:
• The alarm popup appears.
• The corresponding alarm lamp will light up, if
present.
• The buzzer is activated, if connected and set.
• If supported, the alarm is forwarded over the
NMEA 2000 network.
Alarm details are available in
Alarms
.
SET AN ALARM
• In ALARMS > Setup select the value to activate the alarm and then Active.
• Set the desired alarm threshold.
To Next Page
Loading...