Veratron VMH 35 - Troubleshooting; Data Display Issues; Internal GPS Issues

TROUBLESHOOTING
B001167
TROUBLESHOOTING
DATA DISPLAY
Problem
Root c
aus
e
Solution
The values
displayed are not
as expected.
Incorrect sensor
configuration.
Check the configuration in the Sensors menu.
Sensor connected
incorrectly.
Check the connection, refer to the
Installation
Instructions.
The NMEA 2000 network
backbone has not been
created correctly.
Check the connections and that there is a
termination at both the beginning and end of the
backbone.
The value is not
displayed / Only
dashes displayed
Not
available on the network.
Check that the sensor is functioning correctly.
Sensor not connected.
Connect the sensor, refer to the
Installation
Instructions .
The NMEA 2000 network
backbone has not been
created correctly.
Check the connections and
that there is a
termination at both the beginning and end of the
backbone.
INTERNAL GPS
Problem
Root cause
Solution
The displayed speed is "
--
"
GPS module in search state
(
GPS search
)
Wait. The search operation takes about
one minute, then the GPS is ready (
GPS
valid
).