SETUP
Cable Connections
P400/P400 P
LUS INSTALLATION GUIDE 19
USB Connection
• Configuration 1 - P400 to V200c
P400 can be powered by V200c via the USB port. Connect the USB cable
CBL282-038-xx-A directly to the USB1 (USB Vertical Type A) port of V200c.
Figure 9 Connecting to V200c via USB
• Configuration 2 - P400 to V200c
P400 can be powered via the V200c multi-communication port of V200c,
which also supports USB connectivity. Insert the USB cable CBL435-002-01-A
directly to the multi-communication port of V200c.
Figure 10 Connecting to V200c via Serial
Do not connect to USB0 via MOD10 port of V200c through splitter cable to power
up the unit as the current limit is set to only 500 mA.
To Next Page
Loading...
Need help?
General
