Settlement Inquiry
Prints out a settlement receipt with current
daily totals:
• Select ‘Menu’
• Scroll up or down until ‘Settlement’ is
displayed
• Select ‘Settlement’
• Select ‘Inquiry’
• Select the current day’s window, or
‘OTHER’ for another day’s Settlement
Window
• If ‘OTHER’ is selected, type in date and
press green ENTER key
Settlement Cutover
Your terminal will automatically settle
at 2200 (10pm). Follow steps below to
manually settle your terminal prior to 2200
and obtain a settlement receipt:
• Select ‘Menu’
• Scroll up or down until ‘Settlement’ is
displayed
• Select ‘Settlement’
• Select ‘Cutover’
• ‘Cutover Y/N’ will be displayed
• If ‘Yes’ is selected the terminal will
cutover and print a settlement receipt
before returning to the idle screen
• If ‘No’ is selected the terminal will
return to the idle screen
Subtotals
Displays the terminal totals for purchase,
cash out and refund, since the last time you
reset the totals:
• Select ‘Menu’
• Scroll up or down until ‘Settlement’ is
displayed
• Select ‘Settlement’
• Select ‘Subtotals’
• The Purchase, Cash Out, Refund and
Tip totals will be displayed on screen
• Press the green ENTER key
• Terminal will prompt to ‘PRINT
TOTALS?’. If ‘Yes’ is selected the
Subtotals receipt will print
• Terminal will prompt to ‘RESET
TOTALS?’:
- If ‘Yes’ is selected the terminal will
reset the subtotals to zero before
returning to the idle screen
- If ‘No’ is selected the terminal will
return to the idle screen without
resetting the Subtotals
Pending All
Prints the receipts of all nancial
transactions not yet uploaded to the
network i.e. EOV and reversals:
• Select ‘Menu’
• Scroll up or down until ‘Settlement’ is
displayed
• Select ‘Settlement’
• Select ‘Pending All’
• The terminal will print the receipts of all
transactions not yet uploaded, in the
order they were performed
S&F Totals (Store & Forward)
Shows total number and value of
transactions that have not been uploaded to
the network i.e. EOV or Pre-Auth.
• Select ‘Menu’
• Scroll up or down until ‘Settlement’ is
displayed
• Select ‘Settlement’
• Scroll down until ‘S&F Totals’ is
displayed
• Select ‘S&F Totals’
• The terminal will print the S&F Totals
and return to the idle screen
10