SETUP
Installing a Paper Roll
VX 820 DUET R
EFERENCE GUIDE 17
4 Place the paper roll into the printer tray.
Figure 7 Loading Paper Roll
5 Pull the paper up past the glue residue on the paper roll.
6 Close the paper roll cover by gently pressing on the cover until it clicks,
allowing a small amount of paper past the glue residue to extend outside the
printer door.
7 Tear the paper off against the serrated strip in the printer.
Figure 8 Closing Paper Door
To prevent damaging the print roller, always gently press down on the paper roll
cover to close it.