SYSTEM MODE
System Mode Menus
62 V
X
810 REFERENCE GUIDE
SYS MODE PASSWORD
GROUP nn PASSWORD
_ _ _ _ _ _ _ _ _ _
To continue, enter the required password.
The default group password is “Z66831
.” This is
entered as: 1 ALPHA ALPHA 6 6 8 3 1, then press
ENTER.
SYS MODE PASSWORD Gnn
PLEASE TRYAGAIN
This message appears if you enter an incorrect
password.
Press
ENTER to try again. Re-enter your password.
INTERNAL PIN PAD
KEY LOADING MODE
BYTES SENT 0
BYTES RCVD 0
END F4
A communication channel is opened through COM2 to
the IPP to allow key loading.
The number of bytes sent and received is displayed.
Press
END (F4) when done. The system will restart.
KEY LOADING STOPPED:
TIMER EXPIRED
This message is displayed if no data is sent within 1.25
minutes.
Press
END (F4) to continue. The system will restart.
Table 10 System Mode Menu 3 (continued)
Display Action
To Next Page
Loading...
