EasyManuals Logo

VERITAS NetBackup 5340 User Manual

VERITAS NetBackup 5340
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Table 1-1
Veritas 5340 Appliance system specifications (continued)
Veritas 5340 Appliance systemTechnical
Specification
Compute node
70 dBA
5U84 Primary/Expansion Storage Shelf
82 dBA
Acoustic noise
Locating the appliance serial number
A vertical bar on the rear panel of the appliance compute node contains the serial
number.
About 5340 Appliance compute node disk drive
configurations
The Veritas 5340 Appliance compute node contains five 2 TB SAS hard disk drives.
Each disk drive is accessible from the compute node's front panel. An embedded
RAID controller on the compute node's mainboard configures four of the five disk
drives into two mirrored RAID1 volumes.
The two RAID1 volumes are labeled Volume 0 and Volume 1. The disk drives that
are located in slot 0 and slot 1 are configured as the RAID1, VOLUME0 device.
These disk drives contain the appliance operating system, the operating system
swap file, and the NetBackup application. You can hot-swap one of these disk drives
at a time if a drive becomes problematic. However, you cannot operate the appliance
if both disk drives are removed.
12About the Veritas 5340 Appliance
Locating the appliance serial number

Table of Contents

Other manuals for VERITAS NetBackup 5340

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VERITAS NetBackup 5340 and is the answer not in the manual?

VERITAS NetBackup 5340 Specifications

General IconGeneral
BrandVERITAS
ModelNetBackup 5340
CategoryServer
LanguageEnglish

Related product manuals