5340 Appliance compute node technical
specifications
Table A-1
5340 Appliance compute node technical specifications
5340 Appliance compute nodeTechnical Specification
19" EIA standard
The rack rails that are provided for the 5340 Appliance compute node are extensible to
36” (91.44cm). This distance is the maximum depth that is allowed between rack posts.
If the distance between rack posts is longer than 36” (91.44cm) the rails and the appliance
cannot be properly installed.
Rack information
Dual Intel
®
Xeon
®
Scalable ProcessorsProcessor
2.0 GHz (Turbo: 3.7 GHz)CPU speed
40 (20 per processor)Cores
Base memory capacity: 768GB, expandable to 1.5TB
Memory type: DDR4 RDIMM
Configuration: 32GB x 24 RDIMM modules
Operating voltage: 1.2V
Configured clock speed: 2666MHz
Memory type and
configuration (RDIMMs)
55 MB Cache L3
(27.5 MB per processor)
Note: Two processors are installed in a compute node.
Cache
32 GBRAID cache (each
appliance compute node)
YesSAS RAID mezzanine card
NoSAS RAID PCIe card
installed in a appliance
compute node PCIe riser
assembly
RAID1: Veritas 5340 Appliance compute node system disksRAID levels
AdvancedDisk storage capacity: up to 1920TiB (2,111TB)
MSDP storage capacity: up to 960TiB (1,056TB)
See “Available appliance storage options” on page 40.
Usable MSDP and
AdvancedDisk storage
capacity (TB)
76Technical specifications, Environmental/Protocol standards, and Compliance standards
5340 Appliance compute node technical specifications
To Next Page
Loading...
Need help?
General
