99
4G LTE Network
The 4G LTE Network section has the following options:
• Status — Status of the network (Disabled, Not available, or Available).
• Network operator — The vendor that currently provides wireless access.
• Signal strength — Indicates the signal strength for LTE.
• SNR — A measure of signal quality; the higher the number the better the signal.
About Jetpack Diagnostics - 4G LTE Network
GSM/UMTS/HSPA Network
The GSM/UMTS/HSPA Network section has the following options:
• Status — Status of the network (Disabled, Not available, or Available).
• Network operator — The vendor that currently provides wireless access.
• Technology — The current technology in use for the GSM/WCDMA/HSPA network.
Possible values, from slowest to fastest are GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+,
and HSPA+ DC.
• PLMN ID — The name and/or ID of the Public Land Mobile Network.
• Cell ID — .The value identies the cell tower currently in use.
• RSSI — Indicates the RSSI for the GSM/UMTS/HSPA signal. RSSI is a measure of signal
strength in decibels, relative to one milliwatt.
• Roaming — Indicates if the current connection is a roaming connection.
3G Network (eHRPD/EVDO/1xRTT)
The 3G Network (eHRPD/EVDO/1xRTT) section has the following options:
• Status — Status of the network (Disabled, Not available, or Available).
• Network operator — The vendor that currently provides wireless access.
• RSSI (1x) — Indicates the RSSI for the 1xRTT signal.
• RSSI (EVDO) — Indicates the signal strength for the EVDO/eHRPD signal.
• Technology — The type of technology used to connect to the Internet.
• Ec/Io — A measure of how clean the signal is, and is a type of signal-to-noise ratio.
• SID — System identier for the network.
• Roaming — Indicates if the current connection is a roaming connection.
To Next Page
Loading...
Need help?
General
