☞
When CV IN 1 is set to ADD SEQ (1-A), the input also accepts and processes
negative voltages.
LO (1-C) and HI (1-D)
LO (1-C) and HI (1-D) double the faders LO (2) and HI (8). You can either modulate one of them, both or none.
The incoming control voltage is added to the current fader setting. Options 1-C and 1-D work in addition to
option 1-A or 1-B.
CV IN 2 – rhythm control
Control voltage input CV IN 2 is dedicated to rhythm. They double the rhythm section’s functions parameters
NOTE VALUE (2-A), VARIATION (2-B), LEGATO (2-C) and REST (2-D). All four options can be selected at the same
time. The incoming control voltage will be added to the corresponding parameter’s setting.
19
To Next Page
Loading...