We recommend setting your clock source (DAW) to even send the MIDI clock when the DAW stops. MeloDICER
has an internal clock source that continuously synchronizes to the external clock. Once the external clock
disappears, it runs with the last received tempo, but needs to resynchronize when the external clock starts again.
This may lead to a little hiccup at this moment.
MeloDICER can handle shuffled MIDI clocks.
Sending MIDI Clock messages
MeloDICER can send MIDI Clock messages via the MEX3’s MIDI OUT. You can activate this feature with edit-
parameter 9-D. This way, you can, i.e., generate a MIDI clock out of an analog clock patched into CLK IN or
meloDICER can be your master to synchronizing MIDI equipment.
MIDI Start/Stop/Continue
With MEX3 you can send the MIDI Realtime Messages START, STOP and CONTINUE to meloDICER.
33
To Next Page
Loading...