RESTART (3-D)
Restart doubles the restart function that you can access by pushing the rotary encoder (see "Restart" on page 13).
It restarts the sequence from the first step with incoming trigger signals.
MUTE (4-D)
Mute doubles the MUTE function that can be accessed by pressing the M button (see "Mute" on page 13). It
activates the functions with a positive edge, respectively deactivates it with a negative edge at GATE IN 2. This
behaviour can be inverted with parameter INV GATE (5-C).
MUTE-Mode (5-A and 5-B)
There are two options of how mute works. With option NO RESTART (5-A), it continues at the current position
when leaving mute.
If RESTART (5-B) is active, it deactivates mute with the next clock signal and restarts from the first step.
INV GATE (5-C)
With this parameter activated, the MUTE function will be activated with a negative edge and deactivated with a
positive edge on GATE IN 2. This only has an effect if MUTE is activated for GATE IN 2 (4-D).
POWER MUTE (5-D)
When you power up your meloDICER, it is instantly running and sending CVs and gate signals. If you want the
module to be quiet when switching on your modular system you can do that with parameter PWR MUTE (5-D). If
it is activated, meloDICER will automatically go into mute after powering. Just hit the MUTE button to unmute it.
21
To Next Page
Loading...