Access Point Setup
31
Radius Server Settings
Clicking the Radius Server Settings link on the Wireless menu will result in a screen like the
following.
Figure 21: Advanced Settings
Data - Radius Server Settings Screen
Primary Authentica-
tion Server
Enter the name or IP address of the Radius Server on your
network.
Enter the port number used for connections to the Radius
Server.
Enter the key value to match the Radius Server.
Secondary Authentica-
tion Server
The Secondary Authentication Server will be used when the
Primary Authentication Server is not available.
Primary Accounting
Server
Enter the IP address in the following fields if you want this
Access Point to send accounting data to the Radius Server.
The port used by your Radius Server must be entered in the
field.
Enter the key value to match the Radius Server.
Secondary Accounting
Server
The Secondary Accounting Server will be used when the
Primary Accounting Server is not available.