versa VX-AP310N - Ping Test

Wireless Access Point User Guide
72
Ping Test
Ping Test is one useful function for test the Ethernet integrality. If the device can PING the IP
address so the device will work normal. If the device can’t PING the IP address so the device
will disable the wireless function. To reach this screen, select Ping Test in the Administration
section of the menu.
Figure 60: SNMP Screen
Data – Ping Test Screen
Ping Test
Ping Test Mode
Select enable or disable.
Ping IP Address
If enable the function. You must input one IP address and it is valid.
If the IP address is invalid that the device will disable wireless
function.