versa VX-AP310N - Page 40

Wireless Access Point User Guide
36
RTS/CTS Threshold
Enter the preferred setting between 1 and 2347. Normally, this
can be left at the default value.
Preamble Type
Select the desired option. The default is "Long". The "Short"
setting takes less time when used in a good environment.
802.11b Protection
Mode
The Protection system is intended to prevent older 802.11b
devices from interfering with 802.11g transmissions. (Older
802.11b devices may not be able to detect that a 802.11g
transmission is in progress.) Normally, this should be left at
"Auto".