Chapter 10: Troubleshooting
General
(2/01) 10-1
10
Troubleshooting
General
If the scale does not operate properly, find out as much about the problem as possible.
Try to determine whether the problem is constant or intermittent. Mechanical and
electrical influences can cause malfunctions, so be patient and use sound logic when
troubleshooting.
When troubleshooting a VERTEX floor scale, examine the scale’s physical location.
Check for the presence of water, corrosive materials, unlevel floors, high vibrations, air
currents, or physical damage to the scale platform or frame. Also check the instrument
cable for damage, and all connections for loose or improper wiring.
WARNING
PERMIT ONLY QUALIFIED PERSONNEL TO SERVICE THIS
EQUIPMENT. EXERCISE CARE WHEN MAKING CHECKS,
TESTS, AND ADJUSTMENTS THAT MUST BE MADE WITH
POWER ON. FAILING TO OBSERVE THESE PRECAUTIONS
CAN RESULT IN BODILY HARM.
CAUTION
BEFORE CONNECTING/DISCONNECTING ANY INTERNAL ELECTRONIC
COMPONENTS OR INTERCONNECTING WIRING BETWEEN ELECTRONIC
EQUIPMENT, ALWAYS REMOVE POWER AND WAIT AT LEAST THIRTY (30)
SECONDS. FAILURE TO OBSERVE THESE PRECAUTIONS COULD RESULT IN
BODILY HARM OR DAMAGE TO OR DESTRUCTION OF THE EQUIPMENT.
To Next Page
Loading...
General