Vertical Wave Phone - Auto Dial

Auto Dial 3-2
Using Wave Phone Features
Wave Phone User Guide
Auto Dial
Auto Dial allows you to dial frequently used phone numbers with one button. You can also use
your Auto Dial keys to dial digits while a call is connected.
Note: Not all phone types offer this feature.
Programming, Editing, and Using an Auto Dial Button [D]
 DIGITAL PHONES
Note: Not all keys are programmable, so you should first query the current programming (press
MENU, then the appropriate button - see “Using the Query Feature (phone models with displays
only)” on page 3-63 to find an available button. Once you locate a button that you want to
program, follow the steps below to program it.
Hint: Also see “Storing the Saved Number as an Auto Dial” on page 3-52
To Program an Auto Dial Button
1. Choose the button you want to program.
From an idle phone:
2. Press the MENU softkey on the display.
3. Press
NEXT until PROG appears, then press the corresponding softkey.
4. Press the
ADIAL softkey.
5. Press the button you want to use for the Auto Dial (see step 1 above).
6. Use the keypad to enter the name you want to assign to this button.
7. Press
Next when the name is entered.
8. Enter the number you want to assign to this button.
If you are programming an external phone number, enter the full phone number
(including the external access digit(s) and area code).
You can press the TAP or Flash button to enter a flash at the start of the dialing string (to
use Flash codes). You can press HOLD to insert a pause in the dialing string.
9. Press
Save to store the settings.
10. Press SPEAKER to exit the menu.
Release 1.5 SP2
June 2009