Call Appearance 3-3
Using Wave Phone Features
Wave Phone User Guide
To Edit an Auto Dial button
Follow steps 1 and 2 from above.
11. Press
NEXT until EDIT appears, then press the corresponding softkey.
12. Press the the AutoDial button you wish to edit.
13. Make the changes to the AutoDial name
14. Use the keypad to change the name.
AND/OR
Press
Next to display the number screen.
15. Change the number as needed (see step 8 for programming the Auto Dial button
for details about entering a number).
16. Press
Save to store the change(s).
To Use an Auto Dial button
Press the Auto Dial button assigned to the number you want to dial.
Call Appearance
To handle multiple calls on the same line, your System Administrator can program Call
Appearance keys to work in conjunction with the Line button. For details about Call
Appearance keys used with Line keys, see “Multiple Call Handling” on page 3-44.
Call History
A list of (up to) the last ten outgoing, ten incoming, and ten missed calls is stored for each phone.
Note that multiple calls to or from the same destination will result in one entry in the list.
Missed calls are not logged if the call is made to a hunt group in which the user is a member.
Using Call History [D]
DIGITAL PHONES
To Access the Call Lists
From an idle phone:
1. Press the MENU softkey on the display.
2. Press
LISTS.
3. Press
Out to view the outgoing list, Miss to view the missed calls list, or Next then In
to view the incoming calls list.
Hint: While viewing a list, you can scroll through the it by pressing Next, or press Sel to
select the call and see when the call was made. Press
DIAL to call the currently displayed
number.
To Next Page
Loading...
