Voicecall 3-63
Using Wave Phone Features
Wave Phone User Guide
Using the Query Feature (phone models with displays only)
A query of a feature button will display what feature has been programmed onto the button.
To Display Feature Information
From an idle phone:
1. Press the MENU softkey on the display.
2. Press a feature button.
The feature button information is shown on the display including the feature name,
button number, and extension number, target number, or programmed number if
applicable.
3. Press SPEAKER to clear the display.
Voicecall
Voicecall is a page directed to a specific digital phone extension that allows the receiving party
to reply.
Using the Voicecall Feature [D]
Note: Typically, a digital phone has only one Voicecall button which requires input of an
extension number to be dialed and paged. However, additional Voicecall buttons may be
programmed on a phone to allow direct calls to other specific extensions. An example for the
use of multiple VoiceCall buttons might be that a supervisor has a Voicecall button with the
standard operation as shown below, yet he/she may also have additional buttons that correspond
to his/her assistant or other members in their group for direct paging purposes (where they don’t
have to input an extension number, the page is placed directly).
To Next Page
Loading...
