Forward Calls 3-37
Using Wave Phone Features
Wave Phone User Guide
To Use the Programmed User Forward Button
1. Press the pre-programmed User Forward button.
If you are prompted for a password:
2. Enter your Voicemail password,
then press #.
You will hear two beeps, the User Forward button red LED will flash (indicating that
Forward is enabled), and
FWD is displayed.
ANALOG PHONES
You can have your calls forwarded to an outside line (for example to a branch office or your
home) or to another extension within the Wave phone system.
To Forward Your Phone to an External Phone
1. Listen for the dial tone, then press *43.
2. Enter the external line access code.
3. Dial the external (destination) phone number, then #.
4. Listen for two beeps.
If prompted:
5. Enter the appropriate voicemail password, then press #.
To Forward Your Phone to Another Extension
1. Listen for the dial tone, then press *43.
2. Dial the destination extension.
3. Listen for two beeps and hang up.
To Cancel Either External or Internal Forwarding
1. Listen for the dial tone, then press *44.
2. Listen for two beeps and hang up.
Using Forward (Follow-me)
From any phone in the system, you can specify an extension to which you want your calls
forwarded - use the procedure shown for digital phones: “Using Forward (Follow-me)” on
page 3-36.
To Next Page
Loading...
