Forward Calls 3-36
Using Wave Phone Features
Wave Phone User Guide
Using Forward (Follow-me)
From any phone in the system, you can specify an extension to which you want your calls
forwarded.
Example: You go to work in a lab room and want all calls forwarded to that room, but have forgotten
to set the forward prior to leaving your office. You can pick up the phone in the lab and set
it for the Follow-me forward. All calls to your office phone will then ring in the lab (until
you cancel the setting).
1. Listen for the dial tone.
2. Press *78.
3. Enter the destination extension.
If you are prompted for a password:
4. Enter the appropriate voicemail password.
To Cancel Forward (Follow-me)
1. Listen for the dial tone.
2. Press *79.
3. Enter the destination extension.
Programming the User Forward Button
To Program a Number on Your User Forward Button
From an idle phone:
1. Press the MENU softkey on the display.
2. Press
NEXT until PROG appears, then press the corresponding softkey.
3. Press
NEXT until Ufwd appears, then press the corresponding softkey.
4. Press the button you want to assign as the User Forward button.
5. Enter the number.
If you enter an external phone number, be sure to include the external line access digit
(usually a 9).
6. Press
Save to store the setting.
7. Press SPEAKER to exit the menu.
To Next Page
Loading...
