Forward Calls 3-35
Using Wave Phone Features
Wave Phone User Guide
To Forward Calls to External Phone Numbers
1. Press the pre-programmed User Forward button.
If your phone does not have a programmed User Forward button, dial *43.
2. Enter the external access digit(s).
The digit that allows you access to an external phone line (usually a 9).
3. Enter the phone number to which you want to forward calls.
If you enter an international phone number, you must enter a # at the end of the number.
4. If you are prompted for a password, enter your Voicemail password,
then press #.
You will hear two beeps, the User Forward button red LED will flash (indicating that
Forward is enabled), and
FWD is displayed.
Note: When you go off hook you receive "stutter" dial tone to indicate your phone is in a
special state.
To Cancel Call Forwarding (Internal/External)
Press the pre-programmed User Forward button.
The User Forward button LED goes off.
If your phone does not have a programmed User Forward button, dial *44 to cancel call
forwarding.
To Next Page
Loading...
