Call Park 3-7
Using Wave Phone Features
Wave Phone User Guide
DIGITAL PHONES
To Park a Call at Your Primary Line
With a party on the line:
1. Press the pre-programmed Self Park button.
If your phone does not have a programmed Self Park button, press Flash, then *64 to
park a call.
2. Listen for two short beeps, and hang up.
If you leave a call parked for a long period of time, your phone rings back, and
PARK is
displayed.
To Retrieve a Parked Call
From any phone:
1. Press the pre-programmed Self Park button.
If the phone does not have a Self Park button, dial *65, then #.
You can also use the Direct Park button (if programmed), then dial your extension to
retrieve a call parked on your Primary Line.
2. Enter your extension to retrieve a call parked on your Primary Line.
ANALOG PHONES
To Self Park a Call
With a party on the line:
1. Press Flash, then *64.
2. Listen for two beeps.
3. Hang up.
To Retrieve a Self Parked Call
1. Listen for the dial tone.
2. Press *65.
3. Dial your extension.
OR
Press # to retrieve a call on your own extension
To Next Page
Loading...
