Battery Screen
Select M AIN MEN U > C O N FIGUR A T IO N > BA T T E R Y to enter the BATTERY screen. This menu has
four screens.
Press the Up or Down button to increase or decrease the value of the settings, and press the Enter
button to confirm it.
ECO Mode Screen
Select M AIN MEN U > C O N FIGUR A T IO N > ECO M O DE to enter the ECO MODE screens.
Press the Up or Down button to move the cursor to the required item, and press the Enter button to
confirm the settings.
Outlet1 Output Control Screen
Select M AIN MEN U > 2 C O N FIGUR AT IO N > 4 O UT LET 1 to enter the OUTLET1 screen. This menu
has two sub menus
Select 1 O UT LET CO N T R O L and press the Enter button to enter the OUTLET CONTROL screen.
Press the Up or Down button to move the cursor to the required item, and press the Enter button to
confirm the settings.
Outlet1 Outlet Setting screen
Select M AIN MEN U > 2 C O N FIGUR AT IO N > 4 O UT LET 1 to enter the OUTLET1 screen. This menu
has two sub menus
Select 2 O u tlet Settin g and press the Enter button to enter the OUTLET SETTING screen.
Outlet2 Screen
The Outlet2 screens are the same as the Outlet1 screens. The same settings are available as on the
Outlet1 screen. If the Outlet2 group will have the same settings as the Outlet1 group, GXT4 offers a
programming shortcut. When configuring the Outlet2 group, select YE S and press the Enter button
to apply the Outlet1 settings to the Outlet2 screen.
Press the Up or Down button to move the cursor to the required item, and press the Enter button to
confirm the settings.
LCD screen
Select Main Menu > 2 C O N FIGUR AT IO N > 6 LC D to enter the LCD screen. This menu has two sub
menus, LANGUAGE and COLOR.
Select 1 L AN GUA GE and press the Enter button to enter the LANGUAGE screen.
Vertiv | Liebert GXT4 Installer/User Guide | 35
To Next Page
Loading...
