Vertiv GXT4-5000RT230 - Page 36

Lanquage screen
GXT4 supports multiple languages. For the list of supported languages and instructions on how to
upload them, refer to the Configuration Program user manual on the included CD.
Color screen
Select 2 C O L O R and press the Enter button to enter the COLOR screen.
FACTORY DEFAULT screen
Select M AIN MEN U > 2 C O N FIGUR AT IO N > 7 FAC T O R Y DEFA UL T to enter the FACTORY DEFAULT
screen.
Control Screen
Select M AIN MEN U > 3 CO N T R O L to enter the CONTROL screen. This screen has three sub menus,
TURN ON & OFF, ALARM CONTROL and BATT TEST.
In the CONTROL screen, press the Up or Down button to move the cursor to the required item, and
press the Enter button to enter its sub menu.
TURN ON & OFF screen
Select M AIN MEN U -> 3 CO N T R O L -> 1 T UR N O N & O FF to enter the TURN ON & OFF screen. This
screen shows one of two displays, TURN ON UPS and TURN OFF UPS, depending on the state of the
UPS.
ALARM CONTROL screen
Select M AIN MEN U -> 3 CO N T R O L -> 2 A L AR M CO N T R O L to enter the ALARM CONTROL screen.
This section allows active audible alarms to be silenced.
To completely turn off the audible alarm, select CO N FIGUR AT IO N > UPS .
BATT TEST screen
Select M AIN MEN U -> 3 CO N T R O L -> 3 BA T T T EST to enter the BATT TEST screen.
Log Screen
Select M AIN MEN U -> 4 L O G to enter the LOG screen. This screen has two submenus, VIEW LOG
and CLEAR LOG.
CLEAR LOG Screen
Select M AIN MEN U > L O G > C LEAR L O G to enter the CLEAR LOG screen.
Press the Up or Down button to move the cursor to the required item. Press the Enter button to
confirm the settings.
Vertiv | Liebert GXT4 Installer/User Guide | 36