Vertiv Liebert GXT RT+ Series User Manual

Vertiv | Liebert® GXT RT+ | Installer/User Guide 7
Step 2: UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords. The power cord
is supplied in the UPS package. Use an upstream circuit breaker rated for your model based on the below table.
MODEL NUMBER RECOMMENDED CIRCUIT BREAKER RECOMMENDED POWER CABLE WIRE SIZE
GXTRT-1000IRT2UXL
10 A 18 AWG
GXTRT-1500IRT2UXL
GXTRT-2000IRT2UXL
GXTRT-3000IRT2UXL 20 A 14 AWG
Step 3: UPS output connection
Connect devices to be protected to the outlets.
Step 4: Communication connection
Communication Port
USB port RS-232 port Intelligent slot

Vertiv Liebert GXT RT+ Series Specifications

General

Brand	Vertiv
Model	Liebert GXT RT+ Series
Category	UPS
Language	English