1 INTRODUCTION
Congratulations on your choice of the Liebert GXT3 uninterruptible power system (UPS). The Liebert GXT3 comes in
nominal power ratings of 5000VA, 6000VA, 8000VA and 10,000VA. It is designed to provide conditioned power to
microcomputers and other sensitive electronic equipment.
When it is generated, alternating current is clean and stable. However, during transmission and distribution it is subject to
voltage sags, spikes and complete power failure that may interrupt computer operations, cause data loss and even damage
equipment. The Liebert GXT3 protects equipment from these disturbances.
The Liebert GXT3 is a compact, on-line UPS. An on-line UPS continuously conditions and regulates its output voltage,
whether utility power is present or not. It supplies connected equipment with clean, sinewave power. Sensitive electronic
equipment operates best from sinewave power.
For ease of use, the Liebert GXT3 features a light-emitting diode (LED) display to indicate both load percentage and
battery capacity. It also provides self-diagnostic tests, a combination ON/Alarm Silence/Manual Battery Test button, a
Standby/Manual Bypass button and a configuration program.
The Liebert GXT3 has a Liebert IntelliSlot
®
port for communication between the UPS and a network server or other
computer systems. This port provides detailed operating information including voltages, currents and alarm status to the
host system when used in conjunction with Liebert MultiLink
®
. Liebert MultiLink can also remotely control UPS operation.
Vertiv | Liebert® GXT3 ™ Installer/User Guide | 9
To Next Page
Loading...
Need help?
General