Vertiv | Liebert LVC | User Manual 6
Installation
Chapter 1: Installation
1.1. Moving, Unpacking and Inspection
1.1.1. Moving
It is recommended to use the mechanical transport equipment such as a forklift or a crane while unloading
and transferring the condenser closest to the installation site. When a forklift is used, insert the tines of the
forklift shown in Figure 2-1 and 2-2 (Considering the single fan condenser for example).
Figure 1-1 Forklift Direction 1
Figure 1-2 Forklift Direction 2
When a crane is used, refer to Figure 2-3 to li the package.
To Next Page
Loading...
